Dust treatment equipment

In the whole process of the application field of the dust treatment equipment, the speed of the air flow inside the pipeline is immediately and effectively established according to the characteristics of the dust. It is easy to deposit, so the equipment will immediately damage the normal operation of its system during the entire process of the application field.

When the dust treatment equipment manufacturer is running, if the gas velocity is very large, the damage of the pressure will increase by square meters. In the whole process of the application field, the grinding of the dust on the wall thickness will be effectively aggravated, which will immediately lead to its pipeline. The service period of the road is reduced, so it is very important to select the appropriate gas water flow for the measurement of the pipeline network system software. 

In the industrial production of dust treatment equipment, the water output of each section in the pipeline is not the same, and the distribution of the gas in the pipeline is not uniform. It is important or there is eddy current. The water output also needs to take into account the dust deposited in the pipeline when the centrifugal fan was stopped before.

The exhaust air volume handled by the dust treatment equipment generally refers to the capacity of the air that the equipment can clean in a unit of time. For important companies, it is cubic meters per hour (m3/h), which is also the entire process of equipment design in the scheme. crucial factor.

In the whole process of the scheme design, it is mainly based on its exhaust air volume. Generally, the exhaust air volume exceeding the specified range cannot be used, otherwise it will immediately cause the dust collector bag in the equipment to be easily blocked, resulting in all products. The period of use will be reduced.

The operating temperature of dust treatment equipment focuses on two factors, which may be the very heavy load temperature of the equipment or the vapor temperature as far as possible above the leakage temperature. Nowadays, the equipment is used for many of the glass fiber filtration systems during the entire manufacturing process. If selected, its very large operating temperature can immediately guarantee about 280 degrees.