Industrial waste gas treatment equipment

What is the cause of oil leakage in industrial waste gas treatment equipment?

Unreasonable design: including product design staff who did not consider sealing when designing the scheme, or did not understand the professionalism of sealing; unscientific design of the sealing structure and scheme, lack of understanding of the operating conditions, working conditions specifications, temperature components and other characteristics, do not pay attention to Corrosion resistance, vibration, pressure equalization and transportation prevention measures of industrial production waste gas treatment equipment; factors such as ventilation, oil valve, liquid guide and disassembly are not fully considered. 

The production and processing accuracy is poor; in the whole process of production, the overall plan is not vertical, and the mutual coordination is not good, the parallelism is poor, the surface roughness is too high, and defects such as air holes and sand holes are caused during forging, and other production Poor processing and manufacturing quality factors may cause leakage.

Improper selection of sealing raw materials; leakage is usually caused by the unscientific selection of raw materials for facilities and the inability to integrate into the sealed working conditions. Sealing raw materials generally have basic properties such as high density, resilience, wear resistance, ozone resistance, radioactive substances, and abrasion resistance. Everyone can specify according to different working conditions, waste gas treatment equipment manufacturers choose raw materials with important properties to suit the sealing specifications.

The management plan cannot be closed, and the equipment is improperly maintained; according to the investigation, it is the direct cause of the equipment leakage, such as the sealed electronic device guarantees the service life, but it is not disassembled immediately, the standard parts are loose, the screw cap is not clamped and adjusted immediately, etc. . Incorrect installation method; many reasons for leakage are the inclined installation position, excessive load, side cracking of seals, different pre-tightening force of tightening screws, and incorrect machining process of industrialized production waste gas treatment equipment.